AK-NORD Parallel to USB Printer Adapter LPT2USB
Adapter to connect printers and multifunction printers with an USB connection to the LPT(parallel) interface of PCs, measuring devices, laboratory and diagnostic devices, control panels, medical devices as well as all other products with a parallel interface.
No USB ports on your older computer? This handy adapter plugs into the LPT (DB25) parallel port found on older computers and includes a built-in AC adapter for the power needed to communicate with USB printers. Use it to extend the useful life of your computers. The adapter can be used to output to multifunction printers but cannot be used to receive scans or faxes. Includes international plug adapters. Requires DB25 parallel socket and USB printer with type 'B' socket. Requires PCL or PostScript printer. Not compatible with host-based printers, GDI printers or printers designed exclusively for Microsoft Windows.
Cable length: 6'
1 x 25 pole SUB-D Plug IEEE-1284 - A
1 x USB-B plug
|Power supply||110-240V / 50/60Hz|
|Output||5Volt / about 100 mA|
|USB - interface|
USB1.1 Low/ Full-Speed
USB2.0 Low / Full-Speed
|Plug||USB - B|
|Speed||Low-Speed 1.5 MBit/sec
Full-Speed 12 MBit/sec
|LPT(parallel) - interface|
03 1284.4 Bidirectional
|Plug||25 pole SUB-D IEEE-1284 - A|
For all systems. No drivers or software are required.
Scanning, PC-Fax, and Software-Toolboxes are not supported.
GDI-Printer (without own emulation) are not supported.